Appling your bumper sticker is easy

Got yourself a bumper sticker, wondering how to apply it? Wondering what you’ll need? Well Big tees, is here to help guide you through.

Your bumper sticker should come in 3 layers. When looking at your sticker

A. Top – transfer tape

B. Middle – sticker

C. Bottom – Backing

  1.   
    Determine the location the decal will be placed. Make sure your decal will actually fit in that location. You could just “eyeball” it, but it’s best to measure. Clean the area thoroughly. Make sure the area is completely dry.

  2. Remove the backing and firming place the sticker in position in the area you chose. Once in place, (do not remove transfer tape) Grab either a rubber squeegee, or something similar rub across the sticker until all the air bubbles are removed. (I use spray) (water will do it) to spray over the top once all the air bubbles are removed and then squeegee top to bottom) this help A. remove the transfer tape easily. B. Helps the sticker stay in place and not come up with the transfer tape.
  3. Peel the transfer tape off the sticker. (start at the top left or right corner and slowly start to remove). If the sticker clings to the tape, slowly replace the tape and repeat Step 2.
  4. Remember, if one step isn’t working as you’d like go back to the prior step.
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s